Value Range Max. 63 charactersNote• You cannot leave this field empty.• If "{MODEL}" is included in this parameter, it will be replacedwith the unit’s model name.Default Value {MODEL}Configuration File Reference HOST_NAME (Page 192)Domain Name ServerDescription Selects whether to receive DNS server addresses automatically or toassign a DNS server addresses (up to 2) manually.Note• This setting is available only when [Connection Mode] is setto [DHCP].Value Range • Receive DNS server address automatically• Use the following settings– DNS1– DNS2Note• If you select [Use the following settings], specify the IPaddress(es) of the primary and, if necessary, secondary DNSserver(s) manually. The permissible values are:Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0","255.255.255.255", "127.0.0.1", etc.)Default Value Receive DNS server address automaticallyPhone User InterfaceReferenceConfiguring the Network Settings of the Unit (Page 19)Configuration File Reference DHCP_DNS_ENABLE (Page 192)4.3.1.3 Static SettingsStatic IP AddressDescription Specifies the IP address for the unit.Note• This setting is available only when [Connection Mode] is setto [Static].Value Range Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0","255.255.255.255", "127.0.0.1", etc.)Default Value Not stored.Document Version 2013-03 Administrator Guide 794.3.1 Basic Network Settings
