# DTMF will be sent through SDP, according to RFC 2833OUTBANDDTMF_1="Y"############################################################# Call Control Settings ############################################################## Enables subscription to the Voice Mail serverVM_SUBSCRIBE_ENABLE="y"# Shared Call SettingsSHARED_CALL_ENABLE_1="Y"# Disables Do Not Disturb, Call Forward synchronization.FWD_DND_SYNCHRO_ENABLE_1="N"D2.6 Setting Configuration File Parameters UsingTR-069TR-069 (Technical Report 069) is a protocol for the remote management of terminals using the technicalspecifications of CWMP (CPE [Customer Premises Equipment] WAN Management Protocol). TR-069 allowsterminals to have their settings configured automatically via connection to ACSs (Auto Configuration Servers).For details about setting up the parameters necessary for using TR-069, see 4.7.4 Management Server and5.3.6 Management Server Settings.Notice• Settings that are configured using TR-069 can also be configured using the standard configuration file.Therefore, take care that settings do not overlap when using both configuration methods together.Settings configured using TR-069RequirementParameter NameRef.TR-069 Parameter Configuration File ParameterTR-106 Device.Time.NTPServer1 NTP_ADDR Page 201TR-106 Device.Time.LocalTimeZone LOCAL_TIME_ZONE_POSIX Page 175TR-106 Device.ManagementServer.URL ACS_URL Page 187TR-106 Device.ManagementServer.Username ACS_USER_ID Page 187TR-106 Device.ManagementServer.Password ACS_PASS Page 187TR-106 Device.ManagementServer.PeriodicInformEnablePERIODIC_INFORM_ENABLE Page 187TR-106 Device.ManagementServer.PeriodicInformIntervalPERIODIC_INFORM_INTERVAL Page 188TR-106 Device.ManagementServer.PeriodicInformTimePERIODIC_INFORM_TIME Page 18850 Administrator Guide Document Version 2013-032.6 Setting Configuration File Parameters Using TR-069
