Value Range 0, 200–2000 (0: No tone)Default Value 440,480Configuration File Reference RINGBACK_TONE_FRQ (Page 169)Tone TimingsDescription Specifies the pattern, in milliseconds, of ringback tones using up to 10whole numbers (off 1, on 1, off 2, on 2…) separated by commas.Note• It is recommended that you set a value of 60 milliseconds ormore for the first value (off 1).Value Range 0–16000 (0: Infinite time)Default Value 60,2000,3940Configuration File Reference RINGBACK_TONE_TIMING (Page 170)4.7.3.4 Stutter ToneTone FrequenciesDescription Specifies the dual-tone frequencies, in hertz, of stutter dial tones tonotify that a voice mail is waiting, using 2 whole numbers separated bya comma.Value Range 0, 200–2000 (0: No tone)Default Value 350,440Configuration File Reference DIAL_TONE4_FRQ (Page 167)Tone TimingsDescription Specifies the pattern, in milliseconds, of stutter dial tones to notify thata voice mail is waiting, using up to 22 whole numbers (off 1, on 1, off 2,on 2…) separated by commas.Note• It is recommended that you set a value of 560 milliseconds ormore for the first value (off 1).Value Range 0–16000 (0: Infinite time)Default Value 560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,0Configuration File Reference DIAL_TONE4_TIMING (Page 167)Document Version 2012-07 Administrator Guide 119Section 4 Web User Interface Programming
