DHCP and TFTP servers may be supplied with your operating system, provided through commercial services,and are also distributed freely on the Internet. Use a server setup that best matches your environment.When installing and setting up the DHCP server and TFTP server, refer to the documentation supplied withthe product.2.4.2.3 Pre-provisioning Setting ExampleThis section gives an example of how to perform pre-provisioning.Setting ExampleItem Description/SettingTFTP server address 192.168.0.130Distribution directory of TFTP server /tftprootModel name of the unit KX-UT670MAC address of the unit 0080F0123456Provisioning server name (the server domainname or URI where the configuration file usedfor provisioning is to be stored)provisioning.example.comFile name of the configuration file used forprovisioningConfig0080F0123456.cfgURL of the configuration file used forprovisioninghttp://provisioning.example.com/Config0080F0123456.cfgDHCP server option 66 192.168.0.130IP address range assigned by DHCP server 192.168.0.16 to 192.168.0.63File name of the configuration file used forpre-provisioningKX-UT670.cfgThe setting example as set in KX-UT670.cfg CFG_STANDARD_FILE_PATH="http://provisioning.example.com/Config{MAC}.cfg"Note• "{MAC}" is replaced by the MAC address of theunit.(e.g., "0080F0123456")Step 1Connect the unit to the network, and turn thepower on.• The unit is assigned the IP address"192.168.0.16" by the DHCP server.• The unit receives the TFTP server address"192.168.0.130" from the DHCP serverusing DHCP server option 66.DHCP ServerSIP PhonePower onIP Address:192.168.0.16TFTP Address:192.168.0.13026 Administrator Guide Document Version 2012-07Section 2 General Information on Programming
