RTCP_INTVL_nParameter Name Example RTCP_INTVL_1, RTCP_INTVL_2, …, RTCP_INTVL_6Value Format IntegerDescription Specifies the interval, in seconds, between RTCP packets.Value Range 5–65535Default Value 5Web User Interface Reference RTCP Interval (Page 101)MAX_DELAY_nParameter Name Example MAX_DELAY_1, MAX_DELAY_2, …, MAX_DELAY_6Value Format IntegerDescription Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.Value Range 3–50 (´ 10 ms)Note• This setting is subject to the following conditions:– This value must be greater than "NOM_DELAY"– This value must be greater than "MIN_DELAY"– "NOM_DELAY" must be greater than or equal to"MIN_DELAY"Default Value 20 (´ 10 ms)Web User Interface Reference Maximum Delay (Page 101)MIN_DELAY_nParameter Name Example MIN_DELAY_1, MIN_DELAY_2, …, MIN_DELAY_6Value Format IntegerDescription Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.Value Range 1 or 2 (´ 10 ms)Note• This setting is subject to the following conditions:– This value must be less than or equal to "NOM_DELAY"– This value must be less than "MAX_DELAY"– "MAX_DELAY" must be greater than "NOM_DELAY"Default Value 2 (´ 10 ms)Web User Interface Reference Minimum Delay (Page 101)Document Version 2012-07 Administrator Guide 179Section 5 Configuration File Programming
