Value Range Max. 40 charactersNote• You cannot leave this field empty.• If "{mac}" is included in this field, it will be replaced with theunit’s MAC address in lower-case.• If "{MAC}" is included in this field, it will be replaced with theunit’s MAC address in upper-case.• If "{MODEL}" is included in this field, it will be replaced with theunit’s model name.• If "{fwver}" is included in this field, it will be replaced with thefirmware version of the unit.Default Value Panasonic_{MODEL}/{fwver} ({mac})Configuration File Reference HTTP_USER_AGENT (Page 155)4.4.3.2 HTTP AuthenticationAuthentication IDDescription Specifies the ID for the User account. If set, this name must be enteredto access the Web user interface at the User access level.Value Range Max. 127 charactersDefault Value Not stored.Authentication PasswordDescription Specifies the password for the User account. If set, this password mustbe entered to access the Web user interface at the User access level.Value Range Max. 127 charactersDefault Value Not stored.4.4.3.3 Proxy Server SettingsEnable ProxyDescription Selects whether to use the proxy server.Note• The unit’s Web server proxy settings are also used forprovisioning and updating the firmware.Value Range • Yes• NoDefault Value No78 Administrator Guide Document Version 2012-07Section 4 Web User Interface Programming
