Default Value Not stored.Phone User InterfaceReferenceTo change the administrator password (Page 49)Configuration File Reference ADMIN_PASS (Page 140)4.5.3 Change User PasswordThis screen allows you to change the password used to authenticate the User account when logging in to theWeb user interface.Note• For security reasons, the characters entered for the password are masked by special characters, whichdiffer depending on the Web browser.• After you change the user password, the next time you access the Web user interface, theauthentication dialog box appears. Two consecutive login failures will result in an error ("401Unauthorized"). This restriction only applies the first time you attempt to log in after changing thepassword. In all other circumstances, an error occurs after 3 unsuccessful login attempts.4.5.3.1 Change User PasswordCurrent PasswordDescription Specifies the current password to use to authenticate the User accountwhen logging in to the Web user interface.Value Range 6–16 characters (except ", &, ', :, <, >, and space)Default Value Not stored.Configuration File Reference USER_PASS (Page 140)New PasswordDescription Specifies the new password to use to authenticate the User accountwhen logging in to the Web user interface.Value Range 6–16 characters (except ", &, ', :, <, >, and space)Document Version 2012-07 Administrator Guide 85Section 4 Web User Interface Programming
