8.1 Backup and RestoreYou can back up user data (including Web programming settings) to an SD card, or restore data from the SDcard.Only the built-in applications are stored on the SD card. Third-party applications cannot be backed up.The data is saved onto the SD card as follows:Folder name /sdcard/kx-ut670Backup data file name YYYYMMDDHHMM(UTC)_backup.datNote• The time stamp of the backup data file will be in UTC, regardlessof the time zone setting.Backup information file name bkinfo.datNotice• It is the user’s responsibility to ensure that the backup data saved on the SD card is kept secure.To Back Up Data to an SD Card1. Press on the Home screen, and then tap [Settings].2. Tap [Administration], enter the administrator password, and then tap [OK].3. Tap [Backup and Restore].4. Tap [Backup data to SD card].5. On the backup confirmation window, tap [OK].6. Enter the new password for backup, and enter it again for confirmation.7. When the completed message is displayed, tap [OK].Note• Backup can be performed only when the unit is idle. Also, the unit cannot receive calls during thebackup.• Only 1 backup file can be stored on the SD card. If the SD card contains a backup file, the existing fileis overwritten.• The password must consist of 8 or more ASCII characters (case-sensitive) (® see EnteringCharacters in 4.2.4 Accessing the Web User Interface). Backup can also be performed withoutrequiring a password.• If you press during the backup, the backup will be canceled.To Restore Data from the SD Card1. Press on the Home screen, and then tap [Settings].2. Tap [Administration], enter the administrator password, and then tap [OK].3. Tap [Backup and Restore].4. Tap [Restore data from SD card].5. Enter the password that was set when the data was stored.6. On the restore confirmation window, tap [OK].224 Administrator Guide Document Version 2012-07Section 8 Backup and Restore
