Description Selects whether a tone is heard in response to key presses.Note• This setting does not affect the iWnn IME Keyboard. For detailsabout available keyboards, refer to the Operating Instructionson the Panasonic Web site (® see Introduction).• If touch tones or selection tones are configured through phoneuser interface programming, changes to this setting areignored.Value Range • Y (Enable Key Pad Tone)• N (Disable Key Pad Tone)Default Value Y5.6.2 Tone SettingsDIAL_TONE1_FRQValue Format Comma-separated IntegerDescription Specifies the dual-tone frequencies, in hertz, of Dial Tone 1 using 2whole numbers separated by a comma.Value Range 0, 200–2000 (0: No tone)Default Value 350,440Web User Interface Reference Tone Frequencies (Page 98)DIAL_TONE1_GAINValue Format IntegerDescription Specifies the gain, in decibels, of Dial Tone 1.Value Range -24–6Default Value 0DIAL_TONE1_TIMINGValue Format Comma-separated IntegerDescription Specifies the pattern, in milliseconds, of Dial Tone 1 using up to 10whole numbers (off 1, on 1, off 2, on 2…) separated by commas.Note• It is recommended that you set a value of 60 milliseconds ormore for the first value (off 1).Value Range 0–16000 (0: Infinite time)Default Value 60,0146 Administrator Guide Document Version 2011-11Section 5 Configuration File Programming
