• The default ID for the Administrator account is "admin", and the default password is "adminpass".The ID cannot be changed from the Web user interface, but it can be changed through configurationfile programming.3. The Web user interface window is displayed. Configure the settings for the unit as desired.4. You can log out from the Web user interface at any time by clicking [Web Port Close].Controls on the WindowThe Web user interface window contains various controls for navigating and configuring settings. The followingfigure shows the controls that are displayed on the [Basic Network Settings] screen as an example:ACDBNote• Actual default values may vary depending on your phone system dealer.• When you log in to the Web user interface with the User account, the languages of messages displayedon the configuration screen may differ depending on the country/area of use.TabsTabs are the top categories for classifying settings. When you click a tab, the corresponding menu itemsand the configuration screen of the first menu item appear. There are 6 tabs for the Administrator accountand 4 tabs for the User account. For details about the account types, see Access Levels (IDs andPasswords) in this section.MenuThe menu displays the sub-categories of the selected tab.Configuration ScreenClicking a menu displays the corresponding configuration screen, which contains the actual settings,grouped into sections. For details, see 4.3 Status to 4.8.4 Restart.ButtonsThe following standard buttons are displayed in the Web user interface:Button FunctionWeb Port Close Closes the Web port of the unit and logs you out of the Web user interface aftera confirmation message is displayed.50 Administrator Guide Document Version 2011-11Section 4 Web User Interface Programming
