Tone TimingsDescription Specifies the pattern, in milliseconds, of busy tones using up to 10whole numbers (off 1, on 1, off 2, on 2…) separated by commas.Note• It is recommended that you set a value of 60 milliseconds ormore for the first value (off 1).Value Range 0–16000 (0: Infinite time)Default Value 60,500,440Configuration File Reference BUSY_TONE_TIMING (Page 149)4.7.3.3 Ringing ToneTone FrequenciesDescription Specifies the dual-tone frequencies, in hertz, of ringback tones using 2whole numbers separated by a comma.Value Range 0, 200–2000 (0: No tone)Default Value 440,480Configuration File Reference RINGBACK_TONE_FRQ (Page 150)Tone TimingsDescription Specifies the pattern, in milliseconds, of ringback tones using up to 10whole numbers (off 1, on 1, off 2, on 2…) separated by commas.Note• It is recommended that you set a value of 60 milliseconds ormore for the first value (off 1).Value Range 0–16000 (0: Infinite time)Default Value 60,2000,3940Configuration File Reference RINGBACK_TONE_TIMING (Page 150)4.7.3.4 Stutter ToneTone FrequenciesDescription Specifies the dual-tone frequencies, in hertz, of stutter dial tones tonotify that a voice mail is waiting, using 2 whole numbers separated bya comma.Value Range 0, 200–2000 (0: No tone)Document Version 2011-11 Administrator Guide 99Section 4 Web User Interface Programming
