Panasonic KX-VC1600SX User Manual

Also see for KX-VC1300: User manual Basic operation guide Basic operation gude User manual User manual

Contents

Panasonic KX-VC1600SX User Manual Manual pdf 100 page image

• The DNS server setting is necessary to usethe following features.– Call by specifying the host name– Setting the SIP server or gatekeeperaddress by host name– Checking for software updates– Downloading the latest version over thenetwork"Primary DNS Server": Enter the IP address of theprimary DNS server."Secondary DNS Server": Enter the IP address ofthe secondary DNS server.Note• "Primary DNS Server" and "SecondaryDNS Server" can be entered only if "DNSServer" is set to "Manual".• If the value for "Primary DNS Server" or"Secondary DNS Server" contains 1 or 2digits numbers, enter these numbers asthey are. Do not enter like [.001].Example: The IP address is [192.168.0.1].– Correct entry: [192.168.0.1]– Wrong entry: [192.168.000.001]3. To change the settings for LAN1: Press [G].• A dialogue box to confirm the saving of settingsis displayed, so save the settings here.To change the settings for LAN2: Press [R].• The second page is displayed.Making LAN2 Settings (KX-VC1600 only)4. Use [ ][ ] to select the following items for input:"LAN 2": select "ON" or "OFF" (default) for LAN2."IP Address": Input the IP address for LAN2."Subnet mask": Input the subnet mask for LAN2.Note• If the IP address or subnet mask contains 1or 2 digit numbers, enter these numbers asthey are. Do not enter like [.001].Example: The IP address is [192.168.0.1].– Correct entry: [192.168.0.1]– Wrong entry: [192.168.000.001]• If "ON" is not set for "LAN 2", "RoutingSettings" will not be displayed. Once "LAN2" is set to "ON", press [G] to save thesettings and close the setting screen. Then,select "Network Settings" and set therouting.Routing settings for LAN2 (KX-VC1600 only)5. Use [ ][ ] to select "Routing Settings" andpress [ENTER].• The routing list screen is displayed.6. Use [ ][ ] to select "Not Registered".7. Press [B].• The routing settings screen is displayed.8. Use [ ][ ] to select the following items for input:"Destination": Input the IP address of the otherparty to communicate with using LAN2."Subnet mask": Input the subnet mask of the otherparty to communicate with using LAN2."Gateway": Input the gateway address forcommunication with other parties that have beenset.Note• If "Destination", "Subnet mask", or"Gateway" contains 1 or 2 digit numbers,enter these numbers as they are. Do notenter like [.001].Example: The IP address is [192.168.0.1].– Correct entry: [192.168.0.1]– Wrong entry: [192.168.000.001]9. Press [G].• A dialogue box to confirm the saving of settingsis displayed.10. Use [ ][ ] to select "Yes" and press [ENTER].• The routing list screen is displayed.Note• To continue setting another routing, repeatsteps 6–10.• The input "Destination" is converted to anetwork address and then used. There is noneed to register multiple destination IPaddresses that have the same networkaddress.11. Press [BACK].• The system settings screen is displayed.Making Connection SettingsNote• You can use the administrator menu to hide theconnection settings screen (Page 125).100 User Manual Document Version 2015-03Contacts and Settings