Remote ControlABCEHIJDKLMNOPQRSTGFPress to enter screen standby mode (Page 23). The power of the unit can be turned on/off by pressingand holding (for 1 second).Press to show your computer’s screen on your and the other party’s display during a video conference call.When not on a video conference call, the computer screen is shown on your display only (Page 72).Press to display the Menu screen (Page 39).Press to show the sub video camera’s images on your and the other party’s display during a videoconference call. When not on a video conference call, the sub video camera’s images are shown on yourdisplay only (Page 72).Press to display the Home screen (Page 37).Press to move the cursor, control the PT (Pan/Tilt) of a video camera, and select items.Press to make or manually answer video conference calls (Page 46, Page 56).Press to select the feature assigned to each colour. Available features are displayed in the guide area(Page 38).Press to adjust the volume during a video conference call. Press [+] to increase and [–] to decrease thevolume (Page 68).Press to mute the microphone during a video conference call, so that the other party cannot hear yourvoice (Page 69).Press to dial or perform settings where inputting digits/characters is required (Page 141).Press to display the connection status of the network and peripheral devices (Page 86).Press to show/hide on-screen information, such as the guide area, on the Home screen and the videoconference call screen (Page 40).Press to change the layout of the screen during a video conference call (Page 63).Document Version 2015-03 User Manual 21Preparation
