Displaying a Computer’s Screen and the Sub VideoCamera’s ImageWhen a computer or sub video camera is connected to the unit, you can display the computer’s screen or thesub video camera’s image on your display and to other parties. This is convenient when explaining somethingon the computer’s screen or the sub video camera’s image while showing them to others, for example.Main videocameraMain videocameraSub videocameraSub videocameraComputer ComputerRouter RouterInternetNote• The computer screen resolutions supported by the unit are VGA (640 ´ 480), SVGA (800 ´ 600), XGA(1024 ´ 768), HD (1280 ´ 720), and WXGA (1280 ´ 768, 1280 ´ 800), SXGA (1280 ´ 1024), UXGA(1600 ´ 1200), WSXGA+ (1680 ´ 1050), Full-HD (1920 ´ 1080).1. Press [PC] or [CAMERA SUB] during a video conference call.For dual stream communication:• You can send the image of your video camera and the image of your computer’s screen or a sub videocamera at the same time to the other party. You can view the other party and check shared data at thesame time.Note• If dual stream communication is disabled in the communication settings (Page 101), or if a devicethat does not support dual stream communication is connected, the screen switching method willbe used.When using the screen switching method (hereafter referred to as "single stream communication"):• Switches the display from the image of the main video camera to that of the computer’s screen or theimage of the sub camera. The same image is also shown on the other party’s display.2. Press [CAMERA MAIN] to return to the image of the main video camera.72 User Manual Document Version 2015-03During Video Conference Calls
