Panasonic KX-VC1600SX User Manual

Also see for KX-VC1300: User manual Basic operation guide Basic operation gude User manual User manual

Contents

Panasonic KX-VC1600SX User Manual Manual pdf 105 page image

"Medium" [default] or "High") of an outgoing callring."Ring Tone Vol.": Press [ENTER] and use [ ][ ] to select the volume level ("OFF", "Low","Medium" [default] or "High") of an incoming callring."Ringback Tone": Press [ENTER] and use [ ][ ] to select the calling sound pattern ("Pattern1" to "Pattern 5") (default: "Pattern 1")."Ring Tone": Press [ENTER] and use [ ][ ] toselect the incoming call sound pattern ("Pattern1" to "Pattern 5") (default: "Pattern 1")."Default Sound Lev.": Use [ ][ ] to select thevolume level (0–20) at the start of a videoconference call (default: 16)."Sound Pre-sets": Press [ENTER] and use [ ][ ] to select the tone ("More Highs","Standard" [default], "More Lows", "Voice" or"Music") at the start of a video conference call.Note• You can listen to a sample of the followingitems by pressing [R].– "Welcome Screen Vol."– "Ringback Tone Vol."– "Ring Tone Vol."– "Ringback Tone"– "Ring Tone"3. Press [G].• A dialogue box to confirm the saving of settingsis displayed.4. Use [ ][ ] to select "Yes" and press [ENTER].• The system settings screen is displayed.Setting the MIC PositionYou can specify where a Digital Boundary Microphoneis conceptually positioned relative to the display. Whensounds are transmitted to another party, they are playedin accordance with the specified positions, whichcreates a stereo environment.Setting the MIC Positionautomatically1. Select "MIC Setting" and press [ENTER].• The auto settings screen is displayed.Note• If the manual settings screen is displayed,press [B] to return to the auto settingsscreen.2. Press [G].• A dialogue box to confirm the saving of settingsis displayed.3. Use [ ][ ] to select "Yes" and press [ENTER].• The system settings screen is displayed.Note• Depending on how many Digital BoundaryMicrophones are connected, the outputsettings differ as follows:– 2 or more Digital BoundaryMicrophones: Monaural output– 1 Digital Boundary Microphone: Stereooutput• When using Digital Boundary Microphonesand an Analogue Boundary Microphonetogether, the output for all BoundaryMicrophones will be monaural.Setting the MIC Position manually1. Select "MIC Setting" and press [ENTER].• The auto settings screen is displayed.Note• If the manual settings screen is displayed,proceed to step 3.2. Press [B].• The manual settings screen is displayed.3. Use [ ][ ] to select the Digital BoundaryMicrophone you want to configure and press[ENTER].4. Use [ ][ ] to select the Digital BoundaryMicrophone’s relative position."Left side": Sounds on left side are played."Right side": Sounds on right side are played."Center Mono": All sounds are played throughboth the left and right speakers at the same volume."Center stereo": Sounds centred on themicrophone are played through both the left andright speakers at the same volume.Document Version 2015-03 User Manual 105Contacts and Settings