4. Use [ ][ ] to select "Network Test" and press[Enter].• The network test screen is displayed.5. Enter an IP address.Note• If the IP address contains 1 or 2 digitnumbers, enter these numbers as they are.Do not enter like [.001].Example: The IP address is [192.168.0.1].– Correct entry: [192.168.0.1]– Wrong entry: [192.168.000.001]6. Press [R].• The network test starts. After the network test isfinished, if the network test was successful ortimed out, the details of the results aredisplayed. If the network test failed, a messageindicating the failure is displayed.7. Press [Home].• The Home screen is displayed.Performing Self DiagnosisYou can check how your image will be displayed andhow your voice will be heard to the other party beforestarting a video conference call, using your own displayand speakers.Note• Self diagnosis can be performed even when aheadset is connected.1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Settings" and press[Enter].• The system settings screen is displayed.3. Press [ ] three times.• The fourth page is displayed.4. Use [ ][ ] to select "Self Diag." and press[Enter].• The self diagnosis screen is displayed with thedialogue box.Note• You can hide or display the dialogue box bypressing [B].• Set the microphone at least 1 m away fromthe speakers.5. Press [R].• The self diagnosis starts.Note• Check the image that is displayed from themain video camera.• To avoid feedback, slowly raise the volumeusing the remote control’s [+] button.• When someone speaks into themicrophone, confirm whether the soundplays back through the speakers.• During self diagnosis, all BoundaryMicrophones will be set to "Centerstereo".• During self diagnosis, the tone will be set to"Standard".User Manual 103Contacts and Settings
