5. Use [ ][ ] to select "Password", then enter theadministrator password (4–10 digits).Note• Please enter the administrator passwordthat was set during installation.• If you forget the administrator password,please contact your dealer.6. Use [ ][ ] to select "Login" and press [Enter].• The admin menu screen is displayed.Making AdministratorPassword Settings1. Login to the administrator menu (Page 105).• The admin menu screen is displayed.2. Use [ ][ ] to select "Password Settings" andpress [Enter].• The password settings screen is displayed.3. Use [ ][ ] to select the following items and entera password (4–10 digits):"Current password": Enter the current password(default: 00000000)."New password": Enter the new password."Retype new password": Enter the new passwordagain.Note• Please change the default login passwordthe first time the unit is installed.• Be sure to keep the password safe.4. Press [G].• A dialogue box to confirm the changing ofsettings is displayed.5. Use [ ][ ] to select "Yes" and press [Enter].• The admin menu screen is displayed.6. Press [Home].• The Home screen is displayed.Making Encryption SettingsNote• Be careful when changing encryption settingsbecause doing so may cause you to becomeunable to communicate with other parties.• There is a danger that encryption settings willbe changed by a third party. Therefore, becareful when managing the administratorpassword and giving users the authority tochange encryption settings.• If an encryption key is not set for SIPcommunication, you cannot enable encryption.• Be aware that if encryption is disabled,eavesdropping might be possible on networksthat are not secured against such actions.1. Login to the administrator menu (Page 105).• The admin menu screen is displayed.106 User ManualContacts and Settings
