Displaying Unit Information1 Press [Status] twice.• The unit information screen is displayed.21Note• When you are not using a SIP server, "SIPUsername" and "SIP Domain Name" will be blank.• The status of communication encryption is displayedunder "Encryption" and the resolution for sendingimages is displayed under "Resolution (send)".This information is not displayed whencommunication is not occurring.• When you are not on the video conference call andboth "SIP" and "H.323" are set to"ON" (Page 109), you can switch the unitinformation screen between SIP and H.323 bypressing [G].• If [Status] is pressed twice during a videoconference call, you can press [R] to switch to thenext screen. That screen displays the unit name, IPaddress/SIP URI (or SIP user name)/MCU’sconference room number@IP address/MCU’s SIPuser name@IP address/H.323 extension/H.323name, packet loss rate, connection bandwidth,resolution, frame rate and field frequency for the 3parties displayed under "Site 1", "Site 2" and "Site3".*1*2*1 "Frequency" is not displayed when using H.323 orconnecting to an MCU or non-Panasonic video conferencesystem.*2 Depending on the other party, "Name" may be blank.• When using H.323, and "Receive H.239 Call" is setto "ON" (Page 95), the information for one sitemay include the information about multiple receivedimages.User Manual 83Displaying the Connection Status
