Note• To continue entering another contact, press[B] and repeat steps 3–5.6. Press [Home].• The Home screen is displayed.Registering a Multiple-party ContactNote• When using H.323, you cannot register amultiple-party contact.• If you are using the KX-VC300, registering amultiple-party contact can only be done afterpurchasing an activation key card(KX-VCS301) to activate multiple-party videoconference calls (Page 115). For details aboutthe activation key, contact your dealer.1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "New Contact" and press[Enter].• The contact list registration screen is displayed.3. Use [ ][ ] to select the following items for input:"Group/Site": Enter a name for the videoconference call (up to 24 characters) (Page 125)."Speed Dial": Enter a speed dial number (1–300)."Multi-Point": Use [ ][ ] to select "2 sites" or"3 sites".For "Site 1"/"Site 2"/"Site 3": Use the followingprocedure to select these from the contact listscreen.1. Use [ ][ ] to select "Site 1", "Site 2" or"Site 3".2. Press [Enter].• The contact list screen is displayed.3. Select a contact using [ ][ ].• You can use [ ][ ] or the numericbuttons of the remote control to select thedisplayed tab (Page 39).4. Press [Enter].• The contact list registration screen isdisplayed.4. Press [G].• A dialogue box to confirm the saving of settingsis displayed.5. Use [ ][ ] to select "Yes" and press [Enter].• The contact list screen is displayed.Note• To continue entering another contact, press[B] and repeat steps 3–5.6. Press [Home].• The Home screen is displayed.Editing Contact Information1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Contact List" and press[Enter].• The contact list screen is displayed.3. Use [ ][ ] to select the contact you want to edit.• You can use [ ][ ] or the numeric buttons ofthe remote control to select the displayed tab(Page 39).4. Press [Enter].• The contact list details screen is displayed.User Manual 87Contacts and Settings
