3. Use [ ][ ] to select "System Initialize" andpress [Enter].• A dialogue box confirming whether you want tostart the system initialisation is displayed.4. Use [ ][ ] to select "Yes" and press [Enter].• The system will automatically restart tocomplete the system initialisation.Note• After initialisation, all system settingspreviously made and information stored inthe contact list and call history are cleared.• Features activated due to softwareenhancement (Page 115) are not cleared.Making Local SiteSettingsYou can register up to 10 local sites. The same unit canbe used in multiple meeting rooms without the need tochange the network or connection mode settings.Registering a Local Site1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Select local site" andpress [Enter].• The select local site screen is displayed.3. Use [ ][ ] to select "Not Registered" and press[B].• The local site settings screen is displayed.4. Use [ ][ ] to select the following items for input:• The following items are displayed over 3 pages.To view all the items, press [R] to move to thenext page, and press [B] to move to theprevious page.• If you press [G] on any of three pages, thesettings for all the three screens will be saved.Note• If the required settings are not specified onall of the screens, pressing [G] on any of thescreens will not save the settings. Save thesettings only after you have specified all therequired settings. The following settings arerequired:User Manual 119Contacts and Settings
