settings will not match the location of the DigitalBoundary Microphone.Making Remote ControlSettingsYou can specify a remote control ID from 1, 2, or 3 forboth the remote control and the unit. The unit respondsto signals from any remote control with the same remotecontrol ID as itself. If you do not specify an ID, the unitresponds to signals from all remote controls. You canconfirm the remote control ID for the unit on the Homescreen (Page 36).1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Settings" and press[Enter].• The system settings screen is displayed.3. Press [ ].• The second page is displayed.4. Use [ ][ ] to select "Remote Ctrl ID" and press[Enter].• The remote control settings screen is displayed.5. Use [ ][ ] to select the following items for input:"Remote ID enable": Use [ ][ ] to select"ON" or "OFF" (default).• When "ON" is selected, you can set a specificremote control ID for the unit.• When "OFF" is selected, the unit will respondto all remote controls."Remote control ID": Use [ ][ ] to select aremote control ID ("ID1" [default]/"ID2"/"ID3") forthe unit."Check ID mismatch": Use [ ][ ] to select"ON" (default) or "OFF".• When "ON" is selected, if the unit receives asignal from a remote control that has an IDdifferent from the one specified on the Homescreen, a warning is displayed. Follow theprocedures on the screen to change the remotecontrol ID.• When "OFF" is selected, even if the unitreceives a signal from a remote control that hasan ID different from the one specified, nowarning is displayed on the Home screen.Note• If multiple remote controls with assignedIDs are being used close together, it isrecommended that you select "OFF" for"Check ID mismatch".6. Press [G].• A dialogue box to confirm the saving of settingsis displayed.7. Use [ ][ ] to select "Yes" and press [Enter].8. When "Remote ID enable" is set to"ON" (Page 105):The dialogue box for changing the ID of the remotecontrol is displayed. Proceed to step 9.Note• While the dialogue box is displayed, videoconference calls cannot be received.Document Version 2013-09 User Manual 105Contacts and Settings
