Panasonic KX-VC300 User Manual

Also see for KX-VC300: Brochure & specs Frequently asked questions Manual Brochure Operating manual

Contents

Panasonic KX-VC300 User Manual Manual pdf 125 page image

3. Use [ ][ ] to select "HDMI Settings" and press[Enter].• The HDMI settings screen is displayed.4. Use [ ][ ] to select the following items for input:"One Touch Play": Use [ ][ ] to select "ON" or"OFF" (default).Note• Normally, select "OFF". Changing thissettings to "ON" may cause the image tochange automatically depending on themodel of the connected video camera."Standby": Use [ ][ ] to select "ON" or"OFF" (default).Note• Depending on the connected video camera,changing this settings to "ON" may causethe video camera (Main, Sub) tosynchronise and enter screen standbymode when the unit enters screen standbymode. Since operation may differdepending on your video camera model,contact your dealer for details.5. Press [G].• A dialogue box to confirm the saving of settingsis displayed.6. Use [ ][ ] to select "Yes" and press [Enter].• The administrator menu screen is displayed.7. Press [Home].• The Home screen is displayed.Exporting DataThe call log, operation log, and contacts list can besaved on a USB memory device. The saved operationlog can be used to specify the cause when problemsoccur. For details, contact your dealer.Note• A mass storage class (FAT16 or FAT32 format)compatible USB memory device can be usedwith this unit.• The following types of USB memory devicescannot be used:– U3 smart drives (USB memory devicescompatible with the U3 platform)– USB memory devices with security features– USB memory devices formatted usingNTFS– USB memory devices with multiple LUNs(Logical Unit Numbers)– USB memory devices formatted withmultiple partitions• USB memory devices are not guaranteed tofully operate. For details, contact your dealer.• To re-connect a USB memory device, makesure to fully remove the USB memory devicebefore connecting it again.• Confirm the USB memory device has sufficientfree space (at least 10 MB) before using it.1. Connect the USB memory device to the USB jackon the back of the unit (Page 22).Note• Make sure that the USB memory device isconnected correctly.2. Log in to the administrator menu (Page 112).• The administrator menu screen is displayed.3. When using IP mode:Press [ ] twice.• The third page is displayed.When using NAT Traversal mode:Press [ ].• The second page is displayed.Document Version 2013-09 User Manual 125Contacts and Settings