• You can set whether to display the icon. This setting affects all displayed images (excluding yourown image) (Page 101). For example, if icon display has been enabled, the icon will be displayedon the image of all other parties, but not on your own image. However, if icon display has beendisabled, the icon will not be displayed on any of the images. Regardless of icon display settings,the icon is not displayed while the combined computer/video feed screen is being displayed(Page 79).Status IndicationThe status of the unit is indicated by icons (Page 37).Note• Pressing [Full Screen] on the remote control will hide or unhide the other party’s information, duration,network status indication*1, and guide displays.*1 If the network status indication has been set to not be displayed, pressing [Full Screen] will not show the icon.Entering characters• Note the following regarding entering the address of the other party.– SIP user name/H.323 name/MCU’s conference room number: alphanumeric characters, symbols . =* + _ - $ ! ? / ' ( ) (up to 60 characters)– SIP domain name: alphanumeric characters, symbols . - (up to 128 characters)– H.323 extension: numeric characters, symbols # * (up to 20 characters)– Host names that do not include @: alphanumeric characters, symbols . = * + _ - $ ! ? / ' ( ) (up to128 characters)• For host names in the format of user name@domain name, characters and the number of characters thatcan be entered for user name and domain name are the same as for SIP user name and SIP domain name.• When registering an address to the contact list, @ % : can also be entered.• Enter values that comply with the corresponding standard. For details, contact your network administrator.40 User Manual Document Version 2013-09Preparation
