Controlling a Video CameraIf a PTZ (pan, tilt, zoom) camera or a FIX camera is connected to your unit or the other party’s unit, you cancontrol the pan (side-to-side movement), the tilt (up-down movement), and the zoom of the video camera duringa video conference call. You can perform this operation with the main video camera or a sub video camera.Note• In this manual, "PTZ camera" indicates a video camera whose moving parts will rotate when thedirection of the video camera is changed. "FIX camera" indicates a video camera that has no movingparts and does not rotate.• If the other party is using a KX-VC500, you will not be able to control their video cameras. The otherparties will be able to control your video camera.• If any of the other parties is using a software version older than 2.30 (not including 2.30), you will notbe able to control any of the other party’s video cameras. You will only be able to control your ownvideo camera.• In order for other parties to be able to control your video camera, you must set "CAM ctrl from remotesite(s)" in your settings to "ON" (by default, it is set to "OFF") (Page 107).• For details about compatible video camera models, contact your dealer.• The features that can be used may be limited depending on your video camera model.(e.g., A video camera with only a zoom feature)• When the other party is using a non-Panasonic video conference system, some operations may notbe available, or unintended operations may occur.1 Press [CAM Ctrl].• The site selection dialogue box is displayed.Note• After the site selection dialogue box is displayed,if no operations are performed withinapproximately 3 seconds, the dialogue box willdisappear.Document Version 2013-09 User Manual 63ControllingaVideoCameraControlling a Video Camera
