Panasonic KX-VC300 User Manual

Also see for KX-VC300: Brochure & specs Frequently asked questions Manual Brochure Operating manual

Contents

Panasonic KX-VC300 User Manual Manual pdf 29 page image

Connecting the UnitThis section describes how to connect the main videocamera, display, microphone, LAN cable, AC adaptorand power cord.GFTo each deviceTo a routerTo a displayTo a general - purpose microphoneTo an AC outletADCBENotice• Use only the included power cord.Note• Make sure to read the instruction manuals forall devices being connected.1. Connect the main video camera.• Connect the main video camera to the MainCamera terminal on the back of the unit usingan HDMI cable (A).2. Connect the display.• Connect the display to the HDMI terminal on theback of the unit using an HDMI cable (B).Note• If your display is not compatible with HDMI,use a component cable (Page 34). Sincesound signals are not transmitted whenusing a component cable, connect anamplifier/active speaker (Page 33), or usethe display’s speakers (Page 34).3. Connect a microphone.Digital Boundary Microphone (optional)(KX-VC600 only)Connect the Digital Boundary Microphone to theMIC (Digital) jack on the back of the unit using theproprietary cable (C).• Use only the included cable.• Push and turn the connector of the proprietarycable until it clicks. If the connector does notclick, try reconnecting the cable with the top andbottom of the connector reversed.Analogue Boundary Microphone (optional)Connect the Analogue Boundary Microphone to theMIC (Analog) jack on the back of the unit using theproprietary cable (D).• Use only the included cable.• Ensure that the arrow on the connector of theproprietary cable is facing up when you insertthe cable. When you disconnect the cable, gripthe connector securely and pull it out.General-purpose microphoneConnect the microphone to the Audio In L/R jack onthe back of the unit using the stereo pin plug cable(E) after amplifying the signal to line level using adevice such as a microphone amplifier.• Connect the microphone correctly, as follows:– Left channel ® L– Right channel ® RNote• When connecting both the BoundaryMicrophone and a general-purposemicrophone, both microphones can be usedsimultaneously.• When connecting a headset, refer to "AboutHeadset (Page 33)".4. Connect to the network.• Connect a router to the LAN jack on the back ofthe unit using a category 5 or greater LAN cable(F).Document Version 2013-09 User Manual 29Preparation