105SQW0547Recording modeTaking pictures by setting the aperture value and shutter speedZS100 About [T] (Time)If you set the shutter speed to [T], the shutter stays open when the shutter button ispressed fully. (Approximately up to 120 seconds)The shutter closes if you press the shutter button again. Use this function when youwant to keep the shutter open for an extended period, for example, to record pictures offireworks or night scenes.• When you take pictures with the shutter speed set to [T], use a sufficiently chargedbattery. (→25)• Manual exposure assist is not displayed.• When ISO sensitivity is set to [AUTO], ISO sensitivity will change to [125].• You cannot use this function when the electronic shutter is used.●When you take pictures with the shutter speed set to T (time), we recommendusing remote recording (→312) with a tripod or smartphone as a remote shutterrelease, in order to prevent jitter.●When you take still pictures with the shutter speed set to T (time), the picturesmay have higher noise levels. If you want to suppress noise, we recommendtaking pictures by setting [Long Shtr NR] to [ON] in the [Rec] menu. (→144)ZS100 Enabling/disabling the preview of the selected aperturevalue and shutter speed effects on the recording screen→ [Custom] → [Constant Preview] → [ON] / [OFF]●This function is disabled when the flash is used. Close the flash.●You can use this function only in Manual Exposure Mode.
