284SQW0547Playing Back and Editing PicturesUsing the [Playback] menuZS100 [RAW Processing]You can use the camera to develop still pictures that were recorded in RAW format. Thecreated still pictures are saved in JPEG format.1 Set the menu→ [Playback] → [RAW Processing]2 Press to select RAW file and press [MENU/SET]3 Press to select the item• The following items can be set. The settings used during recording are applied at the time ofsetting.[White Balance]You can select White Balance to make adjustments. When you select anitem with [ ], you can develop the pictures using the same settings thatwere applied for recording.[Exposure Comp.] You can perform Exposure Compensation in the range from –1 EV to+1 EV.[Photo Style] You can select the [Photo Style] effects ([Standard], [Vivid], [Natural],[Monochrome], [Scenery], or [Portrait]).[i.Dynamic] You can select the [i.Dynamic] settings ([HIGH], [STANDARD], [LOW], or[OFF]).[Contrast] You can adjust the contrast.[Highlight] You can adjust the brightness of a highlighted area.[Shadow] You can adjust the brightness of a shadowed area.[Saturation] /[Color Tone]You can adjust the saturation. (You can adjust the coloring when[Monochrome] is selected for [Photo Style].)[Filter Effect] You can select a Filter effect. (Only when [Monochrome] is selected for[Photo Style].)[Noise Reduction] You can set noise reduction.[i.Resolution] You can select the [i.Resolution] settings ([HIGH], [STANDARD], [LOW],[EXTENDED], or [OFF]).[Sharpness] You can adjust the impression of resolution.[Setup]You can perform the following settings.[Reinstate Adjustments]: You can restore the settings to the ones usedduring recording.[Color Space]:You can select [Color Space] from either [sRGB] or[AdobeRGB].[Picture Size]: You can select the picture size ([L], [M], or [S]) of a JPEGfile when saving pictures.4 Press [MENU/SET] to set• The setting methods vary depending on the item. For details, refer to “Setting each item”(→285).
