216SQW0547Functions for specific subjects and purposesTaking pictures automatically at set intervals[Time Lapse Shot]Recording mode:You can preset data such as recording start time and time lapse to take still picturesautomatically. This setting is convenient for taking pictures at constant intervals forlandscape scenes, observation of the gradual changes in animals/plants, and otherapplications. The pictures are recorded as a set of group pictures (→275). When [TimeLapse Video] in the [Playback] menu is used, you can create a motion picture. (→293)• Complete the date and time settings in advance. (→42)1 Set the menu→ [Rec] → [Time Lapse Shot]2 Press to select the item and press [MENU/SET][Start Time] [Now] Starts the recording by fully-pressing the shutter button.[Start TimeSet]Set the time to start recording. Any time up to 23 hours59 minutes ahead can be set.Press to select the item (hour and/or minute),and to set the start time, and press [MENU/SET][ShootingInterval] /[ImageCount]The recording interval and the number of pictures can be set.: Select the item (minute/second/number of pictures): Setting[MENU/SET]: Set• You can set the interval from 1 second to 99 minutes 59 seconds in1-second intervals.• You can set the number of pictures to be recorded from 1 picture to 9,999pictures.• Be sure to use an interval setting that is longer than the exposure time(shutter speed) . (Illustration below)If the interval setting is shorter than the exposure time (shutter speed)(e.g. recording at night), it may cause the recording to skip.First Second Third• The camera may not be able to record using the preset interval and numberof pictures to be recorded under some recording conditions.3 Press to select [Start] and press [MENU/SET]
