Advanced (Recording pictures)34VQT1B86∫ Canceling Power LCD or High anglemode• If you press and hold [LCD MODE] againfor 1 second the screen shown in step 2is displayed. Select [OFF] to cancel PowerLCD mode or High angle mode.• High angle mode is also canceled if youturn the camera off or power save mode isactivated.• The brightness of the pictures displayedon the LCD monitor is adjusted whenPower LCD mode or High angle mode isactivated. Therefore, some subjects maylook different on the LCD monitor.However, this does not affect the recordedpictures.• The LCD monitor automatically returns tonormal brightness after 30 seconds whenrecording in Power LCD mode. Press anybutton to make the LCD monitor brightagain.• If the screen is difficult to see because oflight from the sun etc. shining on it, useyour hand or another object to block thelight.• High angle mode is not activated in thefollowing cases.– In simple mode [ ]– In playback mode [ ]– In print mode [ ]– While the menu screen is displayed– While the review screen is displayedTaking Pictures usingthe Built-in FlashA: Photo flashDo not cover it with your fingers or otherobjects.∫ Switching to the appropriate flashsettingSet the flash to match the recording.1 Press 1 [ ].2 Press 3/4 to select a mode.• You can also press 1 [ ] to select.• For information about flash settings thatcan be selected, refer to “Available flashsettings by recording mode”. (P35)3 Press [MENU/SET].• You can also press the shutterbutton halfway to finish.• The menu screen disappears afterabout 5 seconds. At this time, theselected item is automatically set.FLASHSETSELECT MENUAUTO/RED-EYEFORCED OFFFORCED FLASH ONAUTOSLOW SYNC./RED-EYE
