Advanced (Playback)68VQT1B86• The recording date of the pictureselected in the playback screenbecomes the date selected when thecalendar screen is first displayed.• If there are multiple pictures with thesame recording date, the first picturerecorded on that day is displayed.2 Press 3/4/2/1 to select thedate to be played back.3/4: Select the month2/1: Select the date• If there were no pictures recorded duringa month, the month is not displayed.3 Press [MENU/SET] to display thepictures that were recorded onthe selected date.• Rotate the zoom lever towards [ ][W] to return to the calendar screen.4 Press 3/4/2/1 to select apicture and then press[MENU/SET].• The picture that was selected willappear.∫ To return to the 1 screen playbackscreenAfter the calendar screen is displayed,rotate the zoom lever towards [ ] [T] todisplay 25 screens, 9 screens and the 1screen. (P67)• The pictures are displayed without beingrotated even if you set [ROTATE DISP.] to[ON]. (P74)• You can display the calendar betweenJanuary 2000 and December 2099.• If the recording date of the pictureselected in 25 screen multi playback is notbetween January 2000 and December2099, the camera displays it in the oldestrecording date in the calendar.• Pictures edited on a PC will be displayedwith dates different from the actualrecording dates.• If the date is not set in the camera (P14),the recording date is set as January 1st,2007.• If you take pictures after setting the traveldestination in [WORLD TIME] (P55), thepictures are displayed by the dates at thetravel destination in calendar playback.Using the PlaybackZoom1 Rotate the zoom lever towards[ ] [T] to enlarge the picture.• : 1k>2k>4k>8k>16k• When you rotate the zoom levertowards [ ] [W] after enlarging thepicture, the magnification becomeslower. When you rotate the zoom levertowards [ ] [T], the magnificationbecomes higher.• When you change the magnification,the zoom position indication A appearsfor about 1 second so that you cancheck the position of the enlargedsection.DEC . 1. 2007 1/10CANCEL MENUWCALMENU/SETTCANCEL4X2XDELETEW
