Connecting to other equipment85VQT1B86Connecting to other equipmentConnecting to a PCYou can acquire recorded pictures to a PCby connecting the camera and the PC.The software [LUMIX Simple Viewer] or[PHOTOfunSTUDIO-viewer-](for Windows® ) in the CD-ROM (supplied)allows you to easily acquire picturesrecorded with the camera to a PC, printthem and send them by e-mail.If you use “Windows 98/98SE”, installthe USB driver and then connect it tothe computer.For information about the software in theCD-ROM (supplied) and installing thissoftware, refer to the separate operatinginstructions for PC connection.A: USB connection cable (supplied)B: AC adaptor (DMW-AC5PP; optional)• Use a battery with sufficient battery poweror the AC adaptor (DMW-AC5PP; optional).• Turn the camera off before inserting orremoving the cable for the AC adaptor(DMW-AC5PP; optional).• Set the camera to a mode other than[ ] mode.1 Turn on the camera and the PC.2 Connect the camera to a PC viathe USB connection cable A(supplied).• Connect the USB connection cable withthe [ ] mark facing the [2] mark onthe [DIGITAL] socket.• Hold the USB connection cable at Cand insert straight in or take straightout. (If you forcibly insert the USBconnection cable at a slant or upsidedown you can deform the connectionterminals and damage the camera orthe connected equipment.)D: This message appears during datatransfer.[Windows]The drive appears in the [My Computer]folder.• If you are connecting the camera to a PCfor the first time, the required driver isinstalled automatically so that the cameracan be recognized by “Windows Plug andPlay”. The drive then appears on the[My Computer] folder.[Macintosh]The drive is displayed on the screen.• The drive is displayed as [LUMIX] whenyou connect the camera with no cardinserted.• The drive is displayed as [NO_NAME] or[Untitled] when you connect the camerawith a card inserted.DIGITALAV OUTDC INACCESS
