Panasonic Lumix DMC-FX30 Operating Instructions Manual

Also see for DMC-FX30A - Lumix Digital Camera: Operating instructions Instrucciones de funcionamiento

Contents

Others99VQT1B86[PLEASE RE-CONNECT THE PRINTER.]This message will be displayed if youchange the mode dial to print mode [ ]while this unit and the PC are connected. Ifa printer is connected, change the mode toa mode other than [ ] mode and thencheck that no data is being transferred.([ACCESS] appears on the LCD monitor ofthis unit while data is being transferred.)[USB MODE CHANGED. PLEASEREMOVE THE USB CABLE.]This message will be displayed if youchange the mode dial to a mode other thanprint mode [ ] while this unit and theprinter are connected.Set the mode dial to [ ] again and thendisconnect the USB cable. If printing, stopthe printing and then disconnect the USBcable.TroubleshootingIf you return the menu settings to the initialsettings at the time of purchase, thecondition may improve.Select [RESET] in the [SETUP] menu.(P20)∫ Battery and power source1: The camera cannot be operated evenwhen it is turned on.• Is the battery inserted correctly?– Check the direction of the battery. (P12)• Is the battery sufficiently charged?– Use a battery that has beensufficiently charged.2: The LCD monitor turns off while thecamera is turned on.• Is power save mode (P18) or economymode (P18) activated?– Press the shutter button halfway tocancel these modes.• Is the battery exhausted?– Use a battery that has beensufficiently charged.3: The camera turns off immediatelyafter it is turned on.• Is the battery charge insufficient tooperate the camera?– Use a battery that has beensufficiently charged.– If you leave the camera on, thebattery will be exhausted. Turn thecamera off frequently by using powersave mode (P18) etc.∫ Recording1: The picture cannot be recorded.• Is the mode dial correctly set?• Is there any memory remaining on thebuilt-in memory or the card?– Before recording, delete somepictures. (P29)2: The recorded picture is whitish.The lens is dirty.• The picture can become whitish if thereis dirt e.g. fingerprints on the lens. If thelens is dirty, turn on the camera, ejectthe lens barrel (P9) and gently wipe thelens surface with a soft dry cloth.3: The recorded picture is too bright ordark.• Check that the exposure is correctlycompensated. (P39)4: 2 or 3 pictures are taken at one time.• Is auto bracket (P40) or burst modeset? (P64)5: The subject is not focused properly.• The focus range varies depending onthe recording mode.Rotate the mode dial to set the propermode for the distance to the subject.• Is the subject beyond the focus range ofthe camera? (P22, 42)• Have you taken a picture with jitter?