Panasonic NV-MD9000EN Operating Instructions Manual

Also see for NV-MD9000EN: Service manual Service manual Service manual

Contents

Before Use-46-[3. DISPLAY SETUP]Display Setup Sub-Menu[DATE/TIME]Date and Time Indication -63-[C.DISPLAY]Counter Display Mode -63-[C.RESET]Counter Reset -72-≥It resets the counter to zero. However, itcannot reset the Time Code.[DISPLAY]Display Mode -63-[LCD MODE]LCD Lighting Mode -45-[LCD/EVF SET]LCD and Viewfinder Adjustment -44-[RETURN]Returning to the Main-Menu[4. OTHER FUNCTIONS]Other Functions Sub-Menu[REMOTE]Remote Controller Mode -42-[REC LAMP]Recording Lamp -48-[BEEP SOUND]Beep Sound -64-[SHTR EFFECT]Shutter Effect -49-[CLOCK SET]Date and Time Setting -46-[SELFSHOOT]Recording Yourself -48-[RETURN]Returning to the Main-Menuª [VCR FUNCTIONS]VCR Mode Main-Menu[1. PLAYBACK FUNCTIONS]Playback Functions Sub-Menu[BLANK SEARCH]Blank Search -58-[SEARCH]Index Search Mode -59-[12bit AUDIO]Audio Selector -61-[AUDIO OUT]Audio Output Mode -66-[RETURN]Returning to the Main-Menu[2. DIGITAL EFFECT]Playback Digital Effect Functions Sub-Menu[EFFECT]Digital Effect On/Off -60-[EFFECT SELECT]Digital Effect Selection -60-[RETURN]Returning to the Main-Menu[3. RECORDING SETUP]Recording Setup Sub-Menu[REC SPEED]Recording Speed Mode -47-PRESS MENU TO EXIT2.DIGITAL EFFECT3.RECORDING SETUP4.AV IN/OUT SETUP5.DISPLAY SETUP6.OTHER FUNCTIONS1.PLAYBACK FUNCTIONSVCR FUNCTIONS[AUDIO REC]Audio Recording Mode -47-[AUDIO LEVEL]Audio Level Setting -60-[RETURN]Returning to the Main-Menu[4. AV IN/OUT SETUP]Audio-Video Input/Output Setup Sub-Menu[AV JACK]AV Socket -60-[A.DUB INPUT]Audio Dubbing Input -60-[DV OUT]Analog-Digital Conversion Output -66-[RETURN]Returning to the Main-Menu[5. DISPLAY SETUP]Display Setup Sub-Menu≥All of the items on the [DISPLAY SETUP]Sub-Menu are the same as those on the[DISPLAY SETUP] Sub-Menu of the[CAMERA FUNCTIONS] Main-Menu.[6. OTHER FUNCTIONS]Other Functions Sub-Menu[REMOTE]Remote Controller Mode -42-[CLOCK SET]Date and Time Setting -46-[RETURN]Returning to the Main-MenuSetting Date and TimeSince the internal clock of the Movie Camerahas a slight imprecision, make sure to check thetime before recording.1 Set [OTHER FUNCTIONS] >> [CLOCK SET]>> [YES].2 Press the [PUSH] Dial (14) to select[YEAR]/[MONTH]/[DAY]/[HOUR]/[MIN.] andturn to set it to a desired value.≥Year will cycle in the order shown below.2000, 2001, ..., 2089, 2000, ...3 Press the [MENU] Button (18) to finishsetting the date and time.≥The clock operation starts from [00] second.≥The Menu will disappear when the [MENU]Button is pressed again.≥If the built-in battery is weak, the Date/TimeIndication becomes [--]. In this case, chargethe built-in battery.≥The clock employs the 24-hour system.MENUW.B/SHUTTER/IRISPUSHVOL/JOG(14)(18)CLOCK SETPRESS MENU TO RETURNYEAR 2002MONTH 10DAY 08HOUR 14MIN. 30