Camera Mode-56-ª Wipe Mode and Mix ModeWipe Mode:Like a curtain is being pulled, the still picture ofthe last recorded scene gradually changes tothe moving image of a new scene.Mix Mode:While the moving image of a new scene fadesin, the still image of the last recorded scenegradually fades out.1 Press the [PIC.E.] Button (17) until the[WIPE] or [MIX] Indication is displayed.≥The [WIPE] or [MIX] Indication appears.2 Press the Recording Start/Stop Button (49)to start recording.3 Press the Recording Start/Stop Button (49)to pause the recording.≥The last scene is stored in memory. The[WIPE] or [MIX] Indication changes to[B] or [C].4 Press the Recording Start/Stop Button (49)to restart the recording.≥The last image of the previous scenegradually changes to the new scene.≥For other notes concerning this item, see -66-.WIPEWIPEWIPEMIXMIXMIXPIC.E.(17)(49)Adjusting the MicrophoneSensitivity LevelYou can adjust the microphone sensitivity forrecording.1 Set [CAMERA FUNCTIONS] >>[RECORDING SETUP] >> [MIC LEVELADJ.] >> [YES].≥The [MIC LEVEL SETUP] Menu appears.2 Press the [PUSH] Dial (14) to select the[MNL (AGC*, NO-AGC)].≥The Microphone Level Meter appears.≥AGC* : Auto Gain ControlAUTO: AGC is activated, and therecording level is adjustedautomatically.MNL (AGC): The desired recording level canbe set. AGC will also beactivated to reduce the amountof distortion in the music.MNL (NO-AGC): AGC is not activated and sonatural recording can beperformed. Adjust in such a waythat the sound will not bedistorted at the maximumvolume level.3 Turn the [PUSH] Dial (14) to increase ordecrease the bars of the [GAIN] Indication.≥Adjust the [GAIN] value so that the last 3Bars of the [LEVEL (MIC)] will not light red.(Otherwise,the Sound is distorted.)≥For other notes concerning this item, see -66-.MENUW.B/SHUTTER/IRISPUSHVOL/JOG(14)(18)W.B/SHUTTER/IRISPUSHVOL/JOG(14)MIC LEVEL SETUPPRESS MENU TO RETURNMODE AUTO MNL MNL(AGC) (NO-AGC)( ) -30 0 +6GAIN |||||||||||---( ) -30 0 +6LEVEL |||(MIC)W.B/SHUTTER/IRISPUSHVOL/JOG(14)