Camera Mode-54-Manual Iris Adjustment(F Number)You can use this function when the screen is toobright or too dark.1 Set the [AUTO/MANUAL/PROG.AE] Switch(15) to [MANUAL].≥The [MNL] Indication appears.2 Press the [PUSH] Dial (14) until the IrisIndication appears.3 Turn the [PUSH] (14) Dial to adjust the iris.Range of Iris AdjustmentCLOSE (Closed), F16, ..., F2.0,OP (Opened)i0dB, ..., OPi18dBWhen the Gain-up Mode [GAINUP] (-55-) isused, Iris adjustment is by OPi15dB.When a value closer to [CLOSE] is selected, theimage becomes darker.When a value closer to [OPi18dB] is selected,the image becomes brighter.The value to which idB is attached indicates aGain-up value. If this value is too large, thequality of the image deteriorates.To Resume Automatic AdjustmentSet the [AUTO/MANUAL/PROG.AE] Switch to[AUTO].≥For other notes concerning this item, see -65-.MANUALPROG. AEAUTO(15)W.B/SHUTTER/IRISPUSHVOL/JOG(14)MNL1/50F2.4Manual Focus AdjustmentFocus can be adjusted manually for recording ina situation where auto focus may not functionwell.1 Set the [AUTO/MANUAL/PROG.AE] Switch(15) to [MANUAL].≥The [MNL] Indication appears.2 Press the [FOCUS] Button (19).≥The [1MF] Indication (Manual Focus Mode)appears.3 Turn the Focus Ring (7) to adjust thefocus.In the following cases, the Focus Ringcannot be used.≥When the Menu Screen is displayed.≥When you are adjusting the White Balanceshutter speed or Iris.To Resume Automatic AdjustmentSet the [AUTO/MANUAL/PROG.AE] Switch to[AUTO] or press the [FOCUS] Button.MANUALPROG. AEAUTO(15)MFMNLFOCUS(19)(7)