Panasonic NV-MX350B Operating Instructions Manual

Also see for NV-MX350B: Service manual

Contents

43Recording Pictures on a Card to a TapeCard Images can be recorded on the Tape one at a time or all automatically.After setting to Card Playback Mode, please carry out the followingprocedures.To Copy 1 Picture1 Slide the [TAPE/CARD] Selector to [TAPE].2 Slide the [PICTURE/MPEG4/VOICE] Selector to [PICTURE].3 Display a desired picture.4 Press the [PHOTO SHOT] Button.≥It takes approximately 7 seconds to record a picture to the Tape.≥During the copying, the Indication 1 appears.≥When recording to tape, select the tape position before recording. Thepicture will be recorded to the tape position when the [PHOTO SHOT]Button is pressed at Step 4.≥When picture with a size other than [640k480] are copied on the cassette,their picture quality will be slightly deteriorated.≥ Picture size recorded on tape is [640k480]. (Cannot save as mega-pixelstill picture)To Copy All the Pictures1111 Slide the [PICTURE/MPEG4/VOICE] Selector to [PICTURE].2222 Display the first picture.≥If a picture other than the first one is displayed, only the subsequentpictures will be copied.3333 Set [CARD FUNCTIONS] >> [CARD EDITING] >>[RECORD TO TAPE] >> [YES].≥It takes 7–11 seconds for each picture to be copy on the Tape. To stopthe copying midway, push the Operation Lever towards [∫].≥During the copying, the Indication 1 appears.≥Moving Picture (MPEG4) and Voice data cannot be recorded from a cardto tape.≥For other notes concerning this item, see page 54.1NOW RECORDINGRECPICTURE VOICEMPEG413MENUSHUTTER/IRIS/ VOL/JOGPUSHTAPE CARD PICTURE VOICEMPEG41 2PHOTOSHOT41NOW RECORDINGREC