Panasonic NV-MX350B Operating Instructions Manual

Also see for NV-MX350B: Service manual

Contents

44Slide ShowThe recorded still pictures in the Card can be played back like a Slide Show.To Play Back All the Pictures Continuously1 Set [CARD FUNCTIONS] >> [CARD EDITING] >>[SLIDE SHOW] >> [YES] >> [SLIDE SHOW] >> [ALL].≥But, this procedure is unnecessary when editing of a Slide Show(undermentioned reference) is not being done.2 Push the operation Lever towards [1].≥The [SLIDE!] Indication is displayed. 1≥All of the pictures are played back for about 5 seconds each.To Pause the Slide ShowPush the Operation Lever towards [;].≥The [SLIDE;] Indication is displayed. 2~~~~~~~~~~~~~~~~~~~~~~~~Editing a Slide ShowYou can set up a Slide Show or change the content.To Select Pictures to Play Back in Your Slide Show1 Set [CARD FUNCTIONS] >> [CARD EDITING] >>[SLIDE SHOW] >> [YES] >> [EDIT] >> [YES].2 Turn the [PUSH] Dial to select a picture then press it.3 Turn the [PUSH] Dial to select playback order then press it.≥This step is skipped when there is no picture that has set for the SlideShow.≥Playback Order Indication 14 Turn the [PUSH] Dial to adjust the playback time then pressit.≥Playback Time (Second) Indication 2≥The [¥] Indication 3 is displayed to the picture set.≥To select the next picture, repeat the Steps 2 to 4 above.5 Press the [MENU] Button to end the setup.To Play Back the Slide Show That Has Been SetYou must set [SLIDE SHOW] >> [EDIT] first.1111 Set [CARD FUNCTIONS] >> [CARD EDITING] >>[SLIDE SHOW] >> [YES] >> [SLIDE SHOW] >> [PRESET].2222 Push the Operation Lever towards [1].≥The [M.SLIDE!] Indication is displayed. 4To Verify the Selected PictureSet [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >>[YES] >> [VERIFY] >> [YES].≥Only the selected pictures are displayed in Multi-Picture Mode in thePlayback order.To Delete the Selected Picture1 Set [CARD FUNCTIONS] >> [CARD EDITING] >>[SLIDE SHOW] >> [YES] >> [DELETE] >> [YES].2 Select the picture you wish to delete and press the [PUSH] Dial.≥The selected picture is marked with a frame.To Reset the Slide Show SetupSet [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >>[YES] >> [RESET] >> [YES] >> [YES].≥Slide Show settings are reset.≥For other notes concerning this item, see page 54.EDITPRESS MENU TO RETURNNo.59SEC213M.SLIDE41, 5111, 2, 3, 411, 2MENUSHUTTER/IRIS/ VOL/JOGPUSH2SLIDE1SLIDE2MENUSHUTTER/IRIS/ VOL/JOGPUSH12