Panasonic NV-MX500B Operating Instructions Manual

Also see for NV-MX500B: Operation instruction Service manual Operating instructions

Contents

VCR Mode-26-several-second intervals. (To cancel, press the [1] Button(81) or the [∫] Button (79).)≥For other notes concerning this item, see -44-.Playback Zoom FunctionA part of the image can be enlarged up to 10 times duringplayback.1 During playback, press the [P.B. ZOOM] Button (73)on the Remote Controller.≥The centre of the image is enlarged to approximately2 times.To Change the Zoom Magnification2 Change the magnification by pressing the [W] Buttonor [T] Button (71) on the Remote Controller.To Change the Enlarging Area of an Image3 Press the Arrow Button (π, ∑, ∏, ∫) (65) on theRemote Controller that points to the area you want toenlarge.To Cancel the Playback Zoom FunctionPress the [P.B. ZOOM] Button (73) on the RemoteController.≥For other notes concerning this item, see -45-.Playback Digital Effect FunctionsDuring playback, special digital effects can be added to therecorded pictures. The same effects as those of DigitalEffects 1 and 2, which are used during recording, areobtained.1 Press the [1] Button (81).2 Press the [SELECT] Button (68) on the RemoteController to select a desired digital effect.INDEX INDEXSELECTSTOPK L∫V/REWSTILL ADVWsVPLAYPAUSEFF/WSTILL ADV6 1 5;E D(81)(79)SELECTSTOREK L∫OFF/ONP.B.DIGITALMENUITEMSETVAR.SEARCH P.B.ZOOM (73)(65) (65)PB ZOOM2tZOOMOSDCOUNTERV/REWDATE/TIMERESET TITLETWsVOLr¥RECMULTI/P-IN-PPHOTOSHOTSTART/STOPA.DUBPLAY FF/W6 1 5(71)INDEX INDEXSELECTSTOPK L∫V/REWSTILL ADVWsVPLAYPAUSEFF/WSTILL ADV6 1 5;E D(81)SELECTSTOREK L∫OFF/ONP.B.DIGITALMENUITEMSETVAR.SEARCH P.B.ZOOM(68)(70)≥When the [SELECT] Button is pressed repeatedly, thedigital effect selection changes.≥The same setting can be done using [DIGITAL EFFECT]Sub-Menu on the [VCR FUNCTIONS] Main-Menu.To suspend Playback Digital Effect TemporarilyPress the [OFF/ON] Button (70) to suspend or restart thedigital effect. When the digital effect is paused temporarily,the selected effect’s indication flashes.To Cancel the Digital EffectPress the [SELECT] Button (68) on the Remote Controllerand clear the digital effect indication.≥For other notes concerning this item, see -45-.ª Wipe Mode and Mix Mode1 Press the [1] Button (81).2 Press the [SELECT] Button (68) on the RemoteController and select [WIPE] or [MIX].3 Press the [STORE] Button (69) at the moment youwant to save as a still picture.≥The [B] or [C] Indication appears, and the imageis saved.4 Press the [OFF/ON] Button (70) in the scene in whichyou want to use the Wipe or Mix effect.≥The scene changes as a result of the Wipe or Mix effect.≥The Wipe Function and Mix Function can be used only fromthe Remote Controller during playback.≥If the [OFF/ON] Button (70) is pressed while Wipe or Mix iscarried out, the effect will stop temporarily at that point.Pressing the [OFF/ON] Button (70) again will bring back theeffect.ª Playing back with Multi-Picture ModeStrobe Multi-Picture Mode [STROBE]You can capture 9 consecutive still pictures from playbackvideo.Manual Multi-Picture Mode [MANUAL]Selecting a desired still picture one at a time, you cancapture 9 still pictures.Index Multi-Picture Mode ([PHOTO], [SCENE])You can capture 9 screens of pictures to which index signalshave been attached.1 Set [VCR FUNCTIONS] >> [DIGITAL EFFECT] >>[EFFECT SELECT] >> [MULTI].2 Set [VCR FUNCTIONS] >> [MULTI-PICTURES] >>[SCAN MODE] >> [STROBE], [MANUAL], [PHOTO] or[SCENE].When [STROBE] is selected:≥Set the [SPEED] to a desired strobe speed. At the[FAST] setting, 9 consecutive still pictures is capturedwithin approximately 1 second, at [NORMAL] withinINDEX INDEXSELECTSTOPK L∫V/REWSTILL ADVWsVPLAYPAUSEFF/WSTILL ADV6 1 5;E D(81)SELECTSTOREK L∫OFF/ONP.B.DIGITALMENUITEMSETVAR.SEARCH P.B.ZOOM(68)(69)(70)(26)(51)MENUPUSHSHUTTER/IRIS/VOL/JOG