Panasonic NV-MX500B Operating Instructions Manual

Also see for NV-MX500B: Operation instruction Service manual Operating instructions

Contents

VCR Mode-29-Recording the Contents of Other EquipmentAfter connecting the Movie Camera and the otherequipment as illustrated, start the following procedures.1 AV Cable2 S-Video Cable (not supplied)≥If your TV is not equipped with AV Input Sockets, the 21-pinAdaptor (purchase separately) is necessary. Consult yourdealer.Movie Camera:1 Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >>[AV JACK] >> [IN/OUT].2 Insert an unrecorded Cassette.Other Equipment:3 Insert a recorded Cassette and start playback.Movie Camera:4 While pressing the [REC] Button (63), press the[PLAY] Button (81).5 Press the [;] Button (78) or [∫] Button (79) to stoprecording.Other Equipment:6 Press the Stop Button to stop playback.≥For other notes concerning this item, see -45-.21-pin AdaptorMICAV IN/OUTPHONES/REMOTEUSB/EDITD(MINI)S-VIDEOIN/OUT12[VIDEO OUT][AUDIO OUT][S-VIDEO OUT](26)(51)MENUPUSHSHUTTER/IRIS/VOL/JOGINDEX INDEXSELECTSTOPK L∫V/REWSTILL ADVTWsVOLr¥RECMULTI/P-IN-P A.DUBPLAYPAUSEFF/WSTILL ADV6 1 5;E D(63)(81)(78)(79)Using the DV Cable for Recording(Digital Dubbing)By connecting this Movie Camera with other digital videoequipment that has a DV Input/Output Terminal using a DVCable VW-CD1E (optional) 1, dubbing can be done in thedigital format.Player/Recorder:1 Insert the Cassette and set to the VCR Mode.Player:2 Press the [1] Button (81) to start playback.Recorder:3 While pressing the [REC] Button (63), press the[PLAY] Button (81).≥Recording starts.To Stop DubbingPress the [;] Button (78) or the [∫] Button (79).≥For other notes concerning this item, see -45-.1DVINDEX INDEXSELECTSTOPK L∫V/REWSTILL ADVTWsVOLr¥RECMULTI/P-IN-P A.DUBPLAYPAUSEFF/WSTILL ADV6 1 5;E D(63)(81)(78)(79)