Panasonic NV-MX500B Operating Instructions Manual

Also see for NV-MX500B: Operation instruction Service manual Operating instructions

Contents

CARD Mode-33-To Select a Desired File and Play It Back1 Set the [TAPE/CARD/CARD MODE] Selector (13) to[CARD].2 Slide the [TAPE/CARD/CARD MODE] Selector (13) to[CARD MODE] until the desired type of data indicationappears.3 Press the [MULTI] Button (24).≥The files recorded on the Card are displayed inMulti-Picture Mode.1 Picture Size (When [PICTURE] is selected at Step 2)MPEG4 Picture Quality (When [MPEG4] is selected atStep 2)2 File Number3 Folder-File Number (When [PICTURE] is selected atStep 2)File Name (When [MPEG4] is selected at Step 2)4 Turn the [PUSH] Dial (26) and select a desired file.≥The selected file is marked with a frame.≥When 7 or more files have been recorded, turn the[PUSH] Dial to display the next file. (The [6] Button or[5] Button can be used instead of the [PUSH] Dial.)5 Press either the [PUSH] Dial (26) or the [MULTI] Button(24).≥The selected file is shown on the entire screen.Using File Search Mode1 Set [CARD FUNCTIONS] >> [CARD EDITING] >>[FILE SEARCH] >> [YES].2 Turn the [PUSH] Dial (26) and select the desired filenumber, and press the [PUSH] Dial (26).≥For other notes concerning this item, see -46-.CARD MODETAPE CARD(13)MULTI/P-IN-P(24)PICTURE1 2 3No.25 100-0014640640640640640640PUSHSHUTTER/IRIS/VOL/JOG(26)(26)(51)MENUPUSHSHUTTER/IRIS/VOL/JOGFILE SEARCHPRESS MENU TO RETURNRecording Pictures on a Card to a TapeCard Images can be recorded on the Tape one at a time orall automatically.After setting to Card Playback Mode, please carry out thefollowing procedures.To Copy 1 Picture1 Slide the [TAPE/CARD/CARD MODE] Selector (13) to[CARD MODE] until the [PICTURE] Indication appears.2 Display a desired picture.3 Set the [TAPE/CARD/CARD MODE] Selector (13) to[TAPE].4 Press the [PHOTO SHOT] Button (25).≥During the copying, the Indication appears.≥It takes a few seconds to record a picture to the Tape.≥When recording to tape, select the tape position beforerecording. The picture will be recorded to the tape positionwhen the [PHOTO SHOT] Button is pressed at Step 4.To Copy All the Pictures1 Slide the [TAPE/CARD/CARD MODE] Selector (13) to[CARD MODE] until the [PICTURE] Indication appears.2 Display the first picture.≥If a picture other than the first one is displayed, only thesubsequent pictures will be copied.3 Set [CARD FUNCTIONS] >> [CARD EDITING] >>[RECORD TO TAPE] >> [YES].≥During the copying, the Indication appears.≥It takes a few seconds for each picture to be copied onthe Tape. To stop the copying midway, press the [∫]Button.≥Moving Picture (MPEG4) and Voice data cannot berecorded from a Card to tape.≥For other notes concerning this item, see -46-.CARD MODETAPE CARD(13)CARD MODETAPE CARD(13)PHOTOSHOT(25)NOW RECORDINGRECCARD MODETAPE CARD(13)NOW RECORDINGREC