ENGLISH - 41button1) Press the button on the remote control.f It will switch each time you press the button, [ (Normal)] → [ (Eco 1)] →[ (Eco 2)].Notef For details, please refer to the [Setting] menu → [Lamp control] (x page 56).Using the digital zoom function(Only for still image-based computer (RGB) and still image-based HDMI signals input)You can enlarge the center area. You can also change the location of the area to be enlarged.buttons1) Press the or < D.ZOOM -> button on the remote control.f The [D. zoom] individual adjustment screen is displayed.f Press asqw on the remote control to move the display position during zoom in.[D.zoom] individual adjustmentscreen Operation Adjustment Adjustment rangePress the button. Increases magnification.0 ~ 33Press the button. Decreases magnification.While the screen is displayed andthe image is expanded.Press the as buttons. Moves the area to the top orthe bottom. -Press the qw buttons. Moves the area to the left orthe right.Notef When the input signals change during [D. zoom], the adjusted value of the digital zoom will be cancelled.f When no signal input, the key operation is invalid and the icon will appear.f You can also press asqw buttons on the control panel to move the display position during zoom in.Controlling the volume of the speakerYou can adjust the volume of the audio output from the build-in speaker and the terminal.buttons1) Press the or button on the remote control. Increases the volume. Decreases the volume.Switching the image modeThis function allows you to switch the image mode.button1) Press the button on the remote control.f It will switch each time you press the button, [Dynamic] → [Standard] →[Cinema] → [Blackboard(Green)] →[Colorboard] → [User image] → [Dynamic] →....Notef For details, please refer to the [Color adjust] menu → [Image mode] (x page 52).Chapter 3 Basic Operations - Basic operations by using the remote control
