ENGLISH - 55[Setting] menuOn the menu screen, select [Setting] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.fAfter selecting the item, press as to set.MEMORY VIEWER/USB DISPLAYASPECT INFO.IMAGELAMPDAYLIGHTVIEWCOMPUTER 1 COMPUTER 2VIDEOENTERMENU KEYSTONEFREEZE AV MUTE P-TIMERD.ZOOM VOLUME MUTE[On start]Set the method of start up when the power cord plugged into the AC outlet.1) Press as to select [On start].2) Press the button.3) Press as to switch the item.f The items will switch each time you press the button.[Off] Starts up in the standby mode.[On] Starts the projection immediately.Notef When you do not turn off the projector in procedure of “Powering Off the Projector” (x page 36), the On start function willnot work properly.[Standby mode]Set the power consumption during standby. Change the setting whether or not use the network function.1) Press as to select [Standby mode].2) Press the button.3) Press as to switch the item.f The items will switch each time you press the button.[Eco] Restricts some functions in the standby mode to reduce power consumption.[Normal]*1 Does not restrict network function and serial communication function even in the standby mode.*1 For PT-LB300 and PT-LB280, it cannot restrict the serial communication function even in the standby mode.Notef If [Standby mode] is set to [Eco], you cannot use network functions and some RS-232C commands.[High land]Change the setting according to the altitude in which you use the projector.1) Press as to select [High land].2) Press the button.3) Press as to switch the item.f The items will switch each time you press the button.[Off] When using the projector in the elevation of below 1 400 m (4 593').[On] When using the projector in the elevation of above 1 400 m (4 593') and below 2 700 m (8 858').Chapter 4 Settings - [Setting] menu