Panasonic PJLink PT-LW330 Operating Instructions Manual

Also see for PT-TW250: Operating instructions

Contents

Panasonic PJLink PT-LW330 Operating Instructions Manual Manual pdf 68 page image

68 - ENGLISHSetting [Ready Countdown] in step 3)The time from the state which the management function is working to the standby mode can be set to 0 ~ 30 minutes when[Power management] is set to [Ready]. The increment is 1 minute.1) Press as to select [Ready Countdown].2) Press the button.3) Press as to switch the setting time.f The items will switch each time you press the button.[0 Min] The ready mode of the power management function is continued.[1 Min] ~ [30 Min] From the ready mode of the power management function to the standby mode when the projectorreach the set time.[Filter counter]This function is used to reset the filter use time and set the warning display.1) Press as to select [Filter counter].2) Press the button.f The [Filter counter] screen is displayed.3) Press as to switch the item.f The items will switch each time you press the button.[Filter counter] Displays the using time of the filter.[Timer] Sets the time to display the warning icon.[Filter counterreset] Resets the filter counter.Setting [Timer]1) Press as to select [Timer].2) Press the button.3) Press as to switch the setting of the time.f The items will switch each time you press the button.[Off] → [100 H] → [200 H] → [300 H][Filter counter reset]1) Press as to select [Filter counter reset].2) Press the button.f The [Filter counter Reset?] screen is displayed.3) Press as to select [Yes] and then press the button.f The [OK?] screen is displayed.4) Press as to select [Yes] and then press the button.[Test pattern]Displays the Test pattern built-in to the projector.Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal beforeperforming various adjustments.1) Press as to select [Test pattern].2) Press the button.f The [Test pattern] screen is displayed.3) Press as to switch the item.Chapter 4 Settings - [Expand] menu