48 - ENGLISH [Input] menu To select the input source directly by pressing the input selection buttons on the remote control or to select the input source in the [Input] screen by pressing the Switching the input source When using the remote control 1) Press the input selection (, , , , USB DISPLAY>) buttons. f To project the corresponding input signal of the selected terminal. Switches to Computer 1/Component input. Switches to Computer 2 input. Switches to HDMI input. Switches to Video/S-video input. USB DISPLAY> Switches to Memory Viewer/USB Display input. When using the control panel 1) Press the f The [Input] screen is displayed. 2) Switches the input source by pressing as to select one item and then press the button. f To project the corresponding input signal of the selected terminal. [Computer] *1 Switches to Computer input. [Computer 1] *2 Switches to Computer 1 input. [Computer 2] *2 Switches to Computer 2 input. [HDMI] Switches to HDMI input. [Component] Switches to YP B P R /YC B C R input. [Video] Switches to Video input. [S-video] Switches to S-video input. [Memory Viewer] *2 Switches to Memory Viewer input. [USB Display] *2 Switches to USB Display input. *1 Only for PT-LB300 and PT-LB280. *2 Only for PT-LW330, PT-LW280, PT-LB360 and PT-LB330. Note f [Computer 2] is not available when [Setting] menu → [Terminal] is set to [Monitor out]. PT-LW330, PT-LW280, PT-LB360, PT-LB330 PT-LB300, PT-LB280 Chapter 4 Settings - [Input] menu
