Panasonic PJLink PT-LW330 Operating Instructions Manual

Also see for PT-TW250: Operating instructions

Contents

Panasonic PJLink PT-LW330 Operating Instructions Manual Manual pdf 49 page image

ENGLISH - 49[Display] menuOn the menu screen, select [Display] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.fAfter selecting the item, press as to set.[Auto PC adj.](Only for computer signals input)When input the computer (RGB) signals, the image may be moved up, down, left or right such as flickering, press the SETUP> button to adjust [Fine sync], [H position], [V position] and [H.Size] automatically in optimal state. Set the image to getan optimal state to match with the audio-visual surroundings in which the projector is used.1) Press as to select [Auto PC adj.].2) Press the button.f [Please wait...] screen is displayed, the Auto PC adj. function will be executed.Notef The projector executes the Auto PC adj. automatically when the computer signals input the projector for the first time.f Automatic adjustment may not work depending on the model of the computer and the input signal.f The [Auto PC adj.] cannot be operated when [480i], [576i], [480p], [576p], [720p], [1080i] or [1080p] is selected in the[Display] menu → [System], or when the signal is coming from the terminal.[Fine sync](Only for computer signals input)You can adjust to achieve an optimal image when there is a flickering image or smeared outlines.1) Press as to select [Fine sync].2) Press the button.3) Press as to adjust the level.f The adjustment values are 0 to +31. Adjust so that the amount of interference is at a minimum.Notef Certain signals may not be adjustable.f Optimal value may not be achieved if the output from the input computer is unstable.f To project a signal with dot clock frequency with 162 MHz or higher, noise may not disappear even if [Fine sync] is adjusted.f [Fine sync] cannot be adjusted when a digital signal is input.[H Position](Only for computer signals input)Move the image position horizontally if the image position projected on the screen is shifted even when the relative position ofthe projector and the screen is installed correctly.1) Press as to select [H Position].2) Press the button.3) Press as to adjust the horizontal image position.Chapter 4 Settings - [Display] menu