Panasonic PJLink PT-LW330 Operating Instructions Manual

Also see for PT-TW250: Operating instructions

Contents

Panasonic PJLink PT-LW330 Operating Instructions Manual Manual pdf 58 page image

58 - ENGLISHOperation Adjustment RangePress the a button. Turns up the volume. 0 ~ +25Press the s button. Turns down the volume.Setting the mute1) Press as to select [Sound].2) Press the button.f The [Sound] screen is displayed.3) Press as to select [Mute].4) Press the button.5) Press as to switch the item.f The items will switch each time you press the button.f You can also press the button on the remote control. (x page 42)[On] Audio is not output.[Off] Audio is output.[HDMI Setup]Switch the setting when the external equipment is connected to the terminal of the projector and the image is notprojected correctly. Or switch the setting of the audio input.[Image]1) Press as to select [HDMI Setup].2) Press the button.f The [HDMI Setup] screen is displayed.3) Press as to select [Image].4) Press the button.5) Press as to switch the item.f The items will switch each time you press the button.[64-940] Select when the HDMI terminal of an external device (such as a blu-ray player) is connected to the terminal.[0-1023]Select when the DVI-D terminal output of an external device (such as a computer) is connectedto the terminal via a conversion cable or similar cable. Select also when the HDMIterminal output of a computer or other device is connected to the terminal.Notef The optimal setting varies depending on the output setting of the connected external device. Refer to the operationinstruction of the external device regarding the output of the external device.[Sound]1) Press as to select [HDMI setup].2) Press the button.f The [HDMI setup] screen is displayed.3) Press as to select [Sound].4) Press the button.5) Press as to switch the item.f The items will switch each time you press the button.[HDMI] Select when the HDMI cable is connected, the image and audio are transmitted, and you do notneed to connect the audio signal separately.[Computer]Select when the DVI-D terminal output of an external device (such as a computer) is connected tothe terminal via a conversion cable or similar cable. The image will not be transmitted,the audio signal is input to

Chapter 4 Settings - [Setting] menu