Panasonic PJLink PT-LW330 Operating Instructions Manual

Also see for PT-TW250: Operating instructions

Contents

Panasonic PJLink PT-LW330 Operating Instructions Manual Manual pdf 74 page image

74 - ENGLISHNetwork controlNetwork connectionsThe projector has a network function, and the following operations are available from the computer using the web browsercontrol.f Setting and adjustment of the projector.f Display of the projector status.Notef A LAN cable is required to use the network function.r Example of a normal network connectionf A Web browser is required to use this function. Confirm that the Web browser can be used beforehand.Compatible Web Browser : Internet Explorer 7.0/8.0/9.0/10.0, Safari 4.0/5.0/6.0 (Mac OS)f Use shielded LAN cable (STP cable) that is compatible with category 5 or above.f Use a LAN cable with length of 100 m or shorter.r Name and function of network function parts 1 2 31 LAN LINK/ACT lamp (yellow)Lights on when connected.Blinks when transmitting/receiving data.2 terminal (10BASE-T/100BASE-TX)Used to connect LAN cable here.3 LAN 10/100 lamp (green)Lights on when connected to the 100BASE-TX.Attentionf When a LAN cable is directly connected to the projector, the network connection must be made indoors.f When connecting cables to both the terminal and the terminal, it may be difficult to removethe LAN cable which is connected to the terminal. When removing the LAN cable from the terminal, remove acable connected to the terminal or the terminal beforehand.Projector settings1) Use the LAN cable (Straight) to connect the projector with computer.2) Turn on the projector.3) Set the [Expand] menu → [Network] → [Network setting]f For details, refer to the [Expand] menu → [Network] (x page 69).ComputerProjectorLAN cable (straight) LAN cable (straight)HubChapter 4 Settings - Network control