Panasonic PT-D5600E Operating Instructions Manual

Also see for PT-D5600E - XGA DLP Projector: Setup and operation manual Operating instructions Service manual

Contents

Panasonic PT-D5600E Operating Instructions Manual Manual pdf 21 page image

21 ENGLISHExample of connecting with PCsRGB 2 INVDSYNC/HDB/P BG/YRR/PSERIALREMOTE 1 REMOTE 2 IN OUTLANDVI-D INRGB 1 INVIDEO IN S-VIDEO ININ OUTRGB 2 INVDSYNC/HDB/P BG/YRR/PSERIALREMOTE 1 REMOTE 2 IN OUTLANDVI-D INRGB 1 INVIDEO IN S-VIDEO ININ OUTDVI-D Cable (available in the market)PC withDVI-D terminalPCPCControl PCNote • For the specifications of the RGB signals that can be applied from the PC, see the data sheet onpage 58.• If your PC has the resume feature (last memory), the computer may not function properly until theresume capability is disabled.• When the SYNC ON GREEN signal is input, do not input sync signals to the SYNC/HD and VDterminals. Doing so may disrupt the images since, rather than using synchronization initiated bythe GREEN signal, the sync signals of the SYNC/HD and VD terminals will be used instead. Evenif the images are not disrupted, the white balance may be lost. If this is the case, select “USER” asthe “COLOR TEMP.” setting (see page 28), and adjust “W-BAL LOW”.• The white balance may be lost when the SYNC ON RGB signal is input. If this is the case, select“USER” as the “COLOR TEMP.” setting (see page 28), and adjust “W-BAL LOW”.• The EDID settings suited to the equipment connected must be performed when DVI-D signals areinput. (Refer to page 33.)Example of connecting with AV productsRGB 2 INVDSYNC/HDB/P BG/YRR/PSERIALREMOTE 1 REMOTE 2 IN OUTLANDVI-D INRGB 1 INVIDEO IN S-VIDEO ININ OUTDVD player Video deck DVD playerDigital Hi-vision video deckwith DVI/HDMI terminalDigital Hi-vision video deckControl PCDVI-D Cable or HDMI-DVIconversion cable(available in the market)D-SUB 9-pin straight cableRed (Connect P R )Blue (Connect P B )Green(Connect Y)• When connecting with a video deck, be sure to use the one with a built-in time base corrector(TBC) or use a TBC between the projector and the video deck.• If nonstandard burst signals are connected, the image may be distorted. If this is the case, connecta TBC between the projector and the video deck.• The EDID settings suited to the equipment connected must be performed when DVI-D signals areinput. (Refer to page 33.)AttentionDownloaded From projector-manual.com Panasonic Manuals