Panasonic PT-D5600E Operating Instructions Manual

Also see for PT-D5600E - XGA DLP Projector: Setup and operation manual Operating instructions Service manual

Contents

Panasonic PT-D5600E Operating Instructions Manual Manual pdf 25 page image

25 ENGLISHUsing the digital zoom (– D.ZOOM +) functionA portion of the picture on the screen can be zoomed in with “– D.ZOOM +” buttons of the remote control. It isuseful for highlighting a specific object during the presentation.Press the “– D.ZOOM +” button of the remote control.The image is zoomed in.Change the magnification with the “– D.ZOOM +”button.The magnification can be adjusted from 1.0 to 3.0 times.Use buttons to move the magnifiedimage.To restore the original image, press the “MENU”button.13%21% 29%32%5%E 181221067647DCBAProduct %20001999TOTALABCDEADJ110131644226- 5122106764718368 368- 1110%81 %119%112%69 %100%BCDE13164422632%2 • The digital zoomed state cannot be stored in memory.• If the input signal format is changed while in digitalzoom mode, the projector will exit digital zoomfunction.• The combined magnification of “POSITION” zoom anddigital zoom is 9.99 times maximum.NoteAutomatic adjustment (AUTO SETUP)Automatic adjustment function adjust the resolution, clock phase and image position automatically when dots-structured analogue RGB signals such as computer signal are supplied. (Automatic adjustment is not available ifmoving picture input signals or signals having a dot clock frequency of more than 108 MHz are supplied.) WhenDVI signals are input, the image position is adjusted automatically.It is recommended to supply images with a bright white frame at the outermost periphery containing characters etc.that are clear in white and black contrast when the system is in automatic adjustment mode. Avoid supplyingimages that involve halftones or gradation such as photographs and computer graphics.• “CLOCK PHASE” may have been shifted even when the adjustment ended normally.In this case, manually adjust the “CLOCK PHASE”.• Automatic adjustments cannot be performed when images with blurred edges or dark images are input.With Composite sync and G-SYNC sync signals and some types of PCs, it may not be possible toperform these automatic adjustments.In this case, manually adjust the items of “INPUT RESOLUTION”, “CLOCK PHASE” and “POSITION”.• Image may be disturbed for about 4 seconds during automatic adjustment, which is not an abnormalerror.NoteUsing the FREEZE functionThe image on the screen displayed when you press the FREEZE button on the remote control is displayed as a stillimage until you press the FREEZE button again.Using the SHUTTER functionIf the projector is not going to be used for a certain period of time such as while a meeting is on a break orpreparations are being made, the mechanical shutter can be used to hide the images temporarily.Press the “SHUTTER” button of the remote control or the main unit.The image is turned off.Press the “SHUTTER” button again.The image comes back.Downloaded From projector-manual.com Panasonic Manuals