27 ENGLISHBasic menu operationsPress the “MENU” button.The MENU appears on the screen.Select (highlight) the desired item withthe or buttons.Selected items are displayed in blue.Press the “ENTER” button to enter yourselection.The submenu for the selected option will now open.(e.g. : PICTURE Menu)Highlight the desired adjustment itemwith the or buttons, then changethe parameter value with the orbuttons.(Example of separate adjustment screen)• If no button is operated for approx. 5 secondswhile a bar graph is displayed, the screen willreturn to the previous page.BRIGHT 32Returning to the previouspage• Pressing the “MENU” button returns the screen tothe previous menu page.• When the MENU is on the screen, pressing the“MENU” button clears all menus from the screen.Menu items shown intransparent characters• Some menu items may not be valid for certainsignal formats applied to the projector.The menu items that cannot be adjusted or used areshown in transparent characters, and they cannot beselected even by pressing the ENTER button.Menu items setting• The bottom prompt line differs on each menudepending on the selected menu option:• A prompt “ ADJ” appears when changingthe setting.• A prompt “ ENTER” appears for a separatebar graph.Resetting to the factorydefaultSTD (standard) button is used to reset all of theprojector adjustment values to the default levelswhich were set at the time of shipment from thefactory.• If the parameter value on a bar graph is reset tothe factory default, the bar turns to white.Note • The upper and lower triangular markings ona bar graph indicate the default setting for theparameter. If no such triangular markings areshown on the bar graph, the parametercannot be reset to the factory default.Indicates the currentparameter value.Indicates thefactory default.MENUPICTUREADVANCED MENUOPTI0N2TEST PATTERNSECURITYOPTION1POSITIONLANGUAGESELECT ENTER EXITNETWORKMENUPICTUREADVANCED MENUOPTI0N2TEST PATTERNSECURITYOPTION1POSITIONLANGUAGESELECT ENTER EXITNETWORKPICTURESELECT ADJ RETRNPICTURE MODE GRAPHICDEFAULTBRIGHT 32CONTRAST 32SHARPNESS 06COLOR TEMP.ONOFFAINRRGBSYSTEMWHITE GAIN 10PICTURESELECT ADJ RETRNPICTURE MODE GRAPHICDEFAULTBRIGHT 32CONTRAST 32SHARPNESS 06COLOR TEMP.ONOFFAINRRGBSYSTEMWHITE GAIN 10Downloaded From projector-manual.com Panasonic Manuals